bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing Wiring Harness At Front Right|Page 2314 > < 2 RA Replacing Wiring Harness At Front Left|Page 2312
Page 1
background image

61 11 ....

Replacing wiring harness at front right

Remove front bumper trim.

Remove cowl panel cover.

Remove wheel arch cover at front right.

Remove passenger seat.

Disconnect battery negative lead.

Remove lower right trim from instrument panel.

Remove entrance cover strip on right.

Remove footwell side trim panel on A-pillar on right.

Remove glovebox.

Remove storage tray.

Unhook holder (1).

Unclip heating duct for right footwell (2) and remove in direction
of arrow.

Installation:

Ensure heating channel for right footwell (2) is correctly seated.

Loosen screws (1).

Remove lid (2) of control unit box.

Unscrew bolt (1).

Unclip module holder (2) from both mountings and remove.

RA  Replacing wiring harness at front right

BMW AG - TIS

08.02.2013  12:25

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Replacing Wiring Harness At Front Right|Page 2314 > < 2 RA Replacing Wiring Harness At Front Left|Page 2312