X Series E53 X5 4.8is (N62-S) OFFRD
Release 8 nuts of bearing bracket (1) from outside to inside.
Clamp special tool 11 9 470 as illustrated in a vise.
Important!
Do not tilt bearing bracket (1).
Carefully lift out bearing bracket (1).
Place bearing bracket (1) with inlet camshaft and eccentric shaft
as illustrated on special tool 11 9 470 .
Secure bearing bracket (1) with a nut (special tool 11 9 473 ).
RA Removing and installing/replacing rocker arms on left inlet side (N62 to 9/03)
BMW AG - TIS
12.02.2013 04:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
