X Series E53 X5 4.8is (N62-S) OFFRD
31 35 005
Removing and installing / replacing push rod
(stabilizer link) for left/right stabilizer
Note:
The wheels must be in the straight-ahead position during
this work step.
Unfasten nut - brace with open-end wrench.
Installation:
The push rods are different and can be identified by the
number on the tube
Odd number = left push rod
Even number = right push rod
Replace self-locking nut.
Tightening Torque 31 35 7AZ.
RA Removing and installing / replacing push rod (stabilizer link) for left/right st
BMW AG - TIS
12.02.2013 06:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -