X Series E53 X5 4.8is (N62-S) OFFRD
Important!
Risk of damage!
Do not kink, twist or crush pipes.
Release screw (1).
Expose wiring harness with pipes up to air supply unit.
Unfasten screws (2).
Remove air supply unit (3) with wiring harness and pipes.
After installation:
•
Activating and filling air spring system:
-
Insert fuse in corresponding slot in fuse box
-
Connect BMW diagnosis system
-
Switch ignition on.
-
Fill rear left or right air spring using the BMW diagnosis
system (control unit functions -> component activation:
activate menu items "Fill rear left/right air spring" once)
-
Check pressure at the air springs.
Note: If an air spring feels soft, carry out troubleshooting
on the air supply unit.
-
Set vehicle down on its wheels
RA Replacing air supply unit (ride-height control)
BMW AG - TIS
12.02.2013 09:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
