X Series E53 X5 4.8is (N62-S) OFFRD
51 11 050
Removing and installing/replacing member
(cross-member) for front bumper trim
Necessary preliminary tasks:
•
Remove underride protection
Note:
The operation is described on the left side; proceed in the same
way for the right side.
Lever lower trim (3) out of guide (1).
Unlock catches (2) and remove trim (3) in direction of arrow.
Release cable ties (1).
Disconnect plug connections (2) for fanfare horns.
Release expander rivet (1) from fan impeller (2).
RA Removing and installing/replacing member (cross-member) for front bumper trim
BMW AG - TIS
12.02.2013 10:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -