X Series E53 X5 4.8is (N62-S) OFFRD
Do not release retaining screw (1) on rear roof frame.
Retaining screw remains on anchor fitting.
Installation:
Tightening torque 72 12 4AZ.
Installation summary, anchor fittings:
(1)
Anchor fitting of ITS head airbag
(2)
Retaining disk
(3)
Retaining screw
Caution!
The retaining clips cannot be released without damage. After
removal, the ITS head airbag must be disposed of and
replaced.
Unclip retaining clips (1) together with ITS head airbag (2) on A-
pillar.
RA Removing and installing / replacing left or right ITS head airbag (model fitted
BMW AG - TIS
12.02.2013 17:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
