X Series E70 X5 4.8i (N62TU) OFFRD
Cut both exhaust pipes at marked points with special tool
00 2 210 and deburr.
Note:
Texts refer to and illustrations show the left side. The procedure is
identical for the right side.
Unfasten screw connection.
Slacken ball band clamp (1) from exhaust pipe.
Installation:
•
Replace ball band clamps.
•
Apply a thin coating of copper past to contact surface
between ball and socket.
•
When tightening down ball band clamps, press exhaust
system against both manifold flanges in order to achieve gap-
free installation.
•
Install ball band clamp at right angles to exhaust pipe.
•
Tightening torque 18 31 1AZ
.
Release screws and remove holder (1).
Tightening torque 18 20 1AZ
.
RA Replacing front muffler (N62TU)
BMW AG - TIS
08.02.2013 01:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
