X Series E70 X5 4.8i (N62TU) OFFRD
31 12 002
Removing and installing/replacing top left
control arm
Special tools required:
•
31 5 220
Warning!
Danger to life!
Mount securing fixture for vehicle on lifting platform to prevent
the vehicle from slipping off or tilting down.
Note:
Control arms with + or - marking (see illustration) are camber
correction arms:
-
Underdimension variant
+
Overdimension variant
These camber correction arms are used to correct the camber
values by 30 minutes. To be used only if the tolerance values are
exceeded or undershot!
An unmarked control arm is a standard part.
Necessary preliminary tasks:
•
Mount securing fixture for vehicle on lifting platform
•
Remove left partition wall for equipment compartment
•
Detach coolant expansion tank and place to one side
Note: Level switch can slip out of the coolant expansion tank
in the process.
•
Remove front wheel
RA Removing and installing/replacing top left control arm
BMW AG - TIS
08.02.2013 02:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
