X Series E70 X5 4.8i (N62TU) OFFRD
Slacken nut (1) two to three thread turns.
If necessary, replace lower section 31 2 242 with lower
section 31 2 247 .
Press control arm (2) with special tool 31 2 240 off swivel
bearing.
Unscrew nut (1) and remove control arm (2) from swivel
bearing.
Installation:
Keep control arm to swivel bearing connection clean and free from
oil and grease.
Replace self-locking nut.
Tightening torque 31 12 4AZ
.
After installation:
•
Perform chassis alignment check
•
Carry out steering angle sensor adjustment/adjustment for
active front steering
RA Removing and installing/replacing left or right lower control arm
BMW AG - TIS
08.02.2013 02:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
