X Series E70 X5 4.8i (N62TU) OFFRD
32 41 331
Replacing pressure line for power steering
(from vane pump to cutting line) (N62)
Warning!
Danger of poisoning if oil is ingested/absorbed through the
skin!
Risk of injury if oil comes into contact with eyes and skin!
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Recycling:
Catch and dispose of hydraulic fluid in a suitable container.
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove right front wheel
•
Remove front underbody protection
•
Remove steering gear cover at top right
Release banjo bolt (1) and detach pressure line (2) from vane
pump.
Installation:
Align pressure line connection by way of flattened sides vertically
to front axle carrier.
Tightening torque 32 41 4AZ
.
RA Replacing pressure line for power steering (from vane pump to cutting line) (N62
BMW AG - TIS
08.02.2013 03:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
