X Series E70 X5 4.8i (N62TU) OFFRD
Unscrew nut (1).
Release bolt (2) and remove control arm (3).
Installation:
Note insertion direction of bolt.
Replace self-locking nut.
Tighten bolt connection in normal position.
Tightening torque 33 32 7AZ
.
After installation:
•
Perform chassis alignment check
RA Replacing one upper control arm
BMW AG - TIS
08.02.2013 04:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -