X Series E70 X5 4.8i (N62TU) OFFRD
33 52 000
Removing and installing/replacing rear left or
right shock absorber
Note:
Read and comply with Information on replacing shock absorbers.
Version with Vertical Dynamics Management:
Important!
Handle the spring strut with care so as to avoid damaging the
control unit (1) and control valve (2).
Necessary preliminary tasks:
•
Remove rear wheel
•
Tension both coil springs with special tool (and leave on
vehicle)
•
Version with ride-height control: Deactivate and drain air
spring system
•
Version with 3rd seat row: Remove lashing rail in luggage
compartment
Version with Vertical Dynamics Management:
Note:
The plug connections on the right side are shown.
Partially detach rear wheel arch cover.
Detach both plug connections (3) and expose lines up to shock
absorber.
1
Plug connection for brake pad wear sensor
RA Removing and installing/replacing rear left or right shock absorber
BMW AG - TIS
08.02.2013 04:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
