bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Overhauling Left Or Right Front Brake Caliper (brake Caliper Removed)|Page 1321 > < 5 RA Removing And Installing_replacing Left Or Right Front Brake Caliper|Page 1319
Page 1
background image

34 11 552

Overhauling left or right front brake caliper
(brake caliper removed)

Special tools required:

00 9 316

Warning!

In the following work step, large forces occur at the brake
calliper piston (up to more than 

2800 N).

Risk of injury!

Note:

Use repair kit, 

refer to BMW Parts Service.

Press off dust sleeve (1).

Installation:

Dust sleeve must be correctly seated in groove (2) of piston and
groove (3) of brake caliper.

The area between the dust sleeve and the brake calliper housing
must be kept dry. It must not come into contact with Ate brake
cylinder paste or brake fluid so as to ensure that the dust sleeve is
perfectly seated.

RA  Overhauling left or right front brake caliper (brake caliper removed)

BMW AG - TIS

08.02.2013  04:56

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Overhauling Left Or Right Front Brake Caliper (brake Caliper Removed)|Page 1321 > < 5 RA Removing And Installing_replacing Left Or Right Front Brake Caliper|Page 1319