X Series E70 X5 4.8i (N62TU) OFFRD
34 31 505
Removing and installing/replacing master
brake cylinder for DSC
Special tools required:
•
32 1 270
Necessary preliminary tasks:
•
Remove expansion tank.
•
Read and comply with General Information.
After completing tasks, bleed brake system with DSC.
Important!
Do not bend brake lines.
Unfasten brake lines (2).
Unclip retaining bar (1) and remove both brake lines from guides.
Installation:
Tightening torque 34 32 1AZ
.
Close off brake lines and brake master cylinder with plugs
32 1 270 .
Release nuts (3) and feed brake master cylinder out of brake
booster.
Installation:
Replace self-locking nuts.
Tightening torque 34 31 1AZ
.
RA Removing and installing/replacing master brake cylinder for DSC
BMW AG - TIS
08.02.2013 05:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
