X Series E70 X5 4.8i (N62TU) OFFRD
Unclip pipes (1) up to air supply unit from holders.
Installation:
Make sure slidable holders are correctly positioned. Adhere to
following dimensions without fail.
E = 6 cm
F = 10 cm
G = 8 cm
H = 10 cm
Unclip pipes (1) up to air supply unit from holders.
Installation:
Make sure slidable holders are correctly positioned. Adhere to
following dimensions without fail.
I = 10 cm
J = 13.5 cm
K = 2.5 cm (stud to holder)
Unclip pipes (1) up to air supply unit from holders.
Installation:
Make sure slidable holders are correctly positioned. Adhere to
following dimensions without fail.
L = 21 cm
M = 25 cm
N = 7 cm (opening to holder)
Unclip pipes (1) up to air supply unit from holders.
Installation:
Make sure slidable holder is correctly positioned. Adhere to
following dimension without fail.
O = 16 cm (edge to holder)
RA Replacing pipes for air springs
BMW AG - TIS
08.02.2013 05:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
