X Series E70 X5 4.8i (N62TU) OFFRD
37 12 ...
Replacing upper vent line for air supply unit
Important!
Risk of damage!
Extreme cleanliness must be ensured in the connection area
of the vent lines during removal and installation. Even the
smallest of dirt particles can cause leakage in the air spring
system.
Necessary preliminary tasks:
•
Remove trim panel for cover on frame side member on right
•
Remove front right wheel arch cover (rear section).
•
Remove front right auxiliary turn indicator light
Release screw (1).
Twist filler duct (2) in direction of arrow out of fluid reservoir
for windscreen washer unit (3) and remove.
If necessary, release vent line (4) at mounting points (5) from
fluid reservoir for windscreen washer unit (3).
Release screws.
Press off side panel slightly.
Installation:
Tightening torque 41 35 7AZ
(A-pillar area).
Tightening torque 41 35 8AZ
(sill area).
RA Replacing upper vent line for air supply unit
BMW AG - TIS
08.02.2013 05:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
