X Series E70 X5 4.8i (N62TU) OFFRD
51 49 090
Removing and installing/replacing panel for
rear lid lower section
Raise trim (1) and disengaged springs (2).
Release screws (3).
Important!
Risk of damage!
When springs (2) are disengaged, rear lid must not be
closed.
Starting at side, pull panel (1) upwards and release from
catches (2).
Installation:
Catches (1) and guides (2) must not be damaged.
Make sure catches (1) and guides (2) are correctly seated.
RA Removing and installing/replacing panel for rear lid lower section
BMW AG - TIS
08.02.2013 09:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
