X Series E70 X5 4.8i (N62TU) OFFRD
61 31 229
Removing and installing/replacing both
switches on sport steering wheel
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove airbag unit
Note:
Illustration shows steering wheel removed.
Release screws (1).
Note:
Both sport steering wheel switches (1) are connected to each
other by the wiring harness.
Disconnect plug connections (2).
Pull switches (1) with design cover (3) in direction of arrow out
of steering wheel.
Installation:
Make sure electrical leads are correctly routed.
Release screws (1).
Feed wiring harness (3) out of design cover (4).
Remove switches (2) from design cover (4).
Installation:
Make sure electrical leads are correctly routed.
RA Removing and installing/replacing both switches on sport steering wheel
BMW AG - TIS
08.02.2013 13:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
