bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

34 RA Removing And Installing_replacing Engine Hood Contact Switch > < 32 RA Removing And Installing_replacing Both Switches On Sport Steering Wheel
Page 1
background image

61 31 231

Removing and installing/replacing steering
wheel module control unit 

Necessary preliminary tasks:

Disconnect battery negative lead

Remove airbag unit

Disconnect plug connection (1).

Unclip steering wheel module control unit (1) in direction of arrow
and remove.

Installation:

Make sure electrical leads are correctly routed.

RA  Removing and installing/replacing steering wheel module control unit

BMW AG - TIS

08.02.2013  13:23

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

34 RA Removing And Installing_replacing Engine Hood Contact Switch > < 32 RA Removing And Installing_replacing Both Switches On Sport Steering Wheel