X Series E70 X5 4.8i (N62TU) OFFRD
62 30 010
Removing and installing/replacing head-up
display
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Important!
Comply with notes and instructions on handling optical
waveguides.
Do not scratch head-up display lens!
Necessary preliminary tasks:
•
Remove instrument panel trim
Remove foam seal (1) from head-up display.
Disconnect plug connection (2).
Release screws (3).
Tightening torque 62 30 2AZ
.
Carefully feed out head-up display towards top.
Installation:
•
Clean head-up display lens.
RA Removing and installing/replacing head-up display
BMW AG - TIS
08.02.2013 14:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
