X Series E70 X5 4.8i (N62TU) OFFRD
66 53 020
Replacing reversing camera
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove rear lid upper section panel
Release screws (1).
Disconnect plug connections (2) and carefully feed out reversing
camera (3).
Tightening torque 66 54 1AZ
.
Replacement:
Remove protective film from reversing camera lens.
Installation:
Moisten seal (1) slightly to facilitate installation.
Seal (1) must be correctly seated in rear lid (2).
RA Replacing reversing camera
BMW AG - TIS
08.02.2013 17:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
