X Series E83 X3 2.0d (M47T2) OFFRD
Important!
Make sure that tab (1) of adapter ring lies completely in
recess (2).
Carefully raise service cap (4).
Important!
The following notes on installation must be observed.
Carefully unlock quick-release fasteners and detach.
Make sure quick-release fasteners are correctly engaged.
Test the quick-release fasteners by pulling on them.
Unlock and detach fuel line (2).
Unlock and detach vent line (3).
Disconnect connector (1).
Installation:
Lay delivery line (1) in a loop.
See following graphic.
Cable (2) must be laid under or after delivery line (see arrow)
and connected.
Cable must not restrict freedom of movement of lever-type sensor!
Note:
Illustration in installation position!
Illustration shows cutaway model.
RA Removing and installing/replacing fuel pump (diesel)
BMW AG - TIS
04.02.2013 11:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
