X Series E83 X3 2.0d (N47) OFFRD
Installation:
Version: transmission output shaft without mounting groove:
-
Support transfer box with a suitable sleeve (1) on
transmission input shaft (2).
-
Push on output flange
-
Fit retaining ring.
Drive a hole into radial shaft seal (2) using a center punch (1).
See illustration.
Important!
Do not use a drill as drillings may result in transmission
malfunction.
Screw in special tool 23 0 490 .
Drive out radial shaft seal (1) with impact weight (2).
Drive in radial shaft seal with special tool 27 1 400 .
RA Replacing radial shaft seal for output flange (ATC 400/500 X-Drive)
BMW AG - TIS
05.02.2013 23:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -