X Series E83 X3 2.0d (N47) OFFRD
Measurement c = approx. 200 mm from middle of lower lock striker screw point.
Measurement d = approx. 450 mm above upper door hinge mounting.
Measurement e = approx. 80 mm above cut d.
Open weld joints in areas (1).
Installation:
Weld in reinforcing panels at all severance cuts.
Remove metal sections (1).
Open weld joints in areas (2) and (3).
Longitudinal member cover is bonded to inner frame in area (4).
Important!
Cut two metal plates in areas (2).
Cut outer metal plate only in areas (3).
Installation:
Cut-out metal sections (1) are required again for sealing.
RA Replacing cover for longitudinal member with left door pillar (partial replaceme
BMW AG - TIS
06.02.2013 03:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -