X Series E83 X3 2.0d (N47) OFFRD
Mark severance cut in accordance with specified measurement
and cut.
Important!
Cut outer metal plate only for following severance cut.
Measurement a = 490 mm above upper door hinge mounting.
Installation:
Weld in reinforcement plate at severance cut.
Mark severance cut in accordance with specified measurement
and cut.
Measurement a = 250 mm behind hole dia. 20 mm.
Installation:
Weld in reinforcement plate at severance cut.
Note:
View from inside
Open weld joints in areas (1).
Open adhesive bond in area (2).
Note:
View from below
Open weld joints in areas (1).
RA Replacing cover for longitudinal member with left door pillar (partial replaceme
BMW AG - TIS
06.02.2013 03:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -