X Series E83 X3 2.0d (N47) OFFRD
Preparation of new part:
Mark severance cuts (1) on new part in accordance with previous severance cuts and cut.
Important!
Cut outer plate only for severance cuts (2).
Measurement a = approx. 220 mm behind hole dia. 20 mm.
Measurement b = approx. 60 mm behind cut a.
Measurement c = approx. 450 mm above upper door hinge mounting.
Measurement d = approx. 80 mm above cut d.
Open weld joints on sheet panel (3) and remove component.
RA Replacing cover for longitudinal member with left door pillar (partial replaceme
BMW AG - TIS
06.02.2013 03:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -