Z Series E85 Z4 2.5i (N52) ROADST
Release screws (1).
Remove exhaust system bracket (2).
Tightening torque: 23 00 1AZ
.
Note:
Pressure line of clutch slave cylinder remains connected.
Important!
Relieve tension on clutch slave cylinder slowly; otherwise air
will be drawn in through sealing sleeve.
Release nuts (2) and remove clutch slave cylinder (1).
Tightening torque: 21 52 5AZ
.
Detach plug (1) from reverse gear switch.
Detach cables from fixtures on transmission.
Supporting transmission:
Support with special tools 23 4 050 , 23 0 132 , 00 2 030 .
Secure transmission with tensioning strap (1).
Tasks are described in Transmission bracket.
After completion of work, check transmission oil level.
RA Removing and installing transmission (GS6-17BG) N52
BMW AG - TIS
12.02.2013 04:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
