Removing and Installing Hard Top Mounting Bracket Z4 25i
54 31 200
Removing and installing/replacing hard top
mounting
Necessary preliminary tasks:
•
Release rear side trim panel upper section on B-pillar
Release screw.
If necessary, press mounting downwards a little and remove
towards front top from main support.
Unclip contact tube and lay to one side.
With contact tube replacement only:
-
Remove rear storage cover.
-
Disconnect plug connection.
-
Disconnect cable
RA Removing and installing/replacing hard top mounting
BMW AG - TIS
12.02.2013 11:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
