bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

25 RA Opening_closing Convertible Top In Event Of A Technical Fault|Page 1824 > < 24 RA Removing And Installing_replacing Hard Top Mounting
Page 1
background image

 54 34 ...

Opening/closing convertible top in event of a
technical fault

Opening convertible top:

Depending on the nature of the technical fault, perform one of the
following tasks before opening the convertible top.

All the tasks may be necessary in a few cases.

Open side windows

Automatic convertible top catch:

Press in cover (1) at top slightly and lever out towards

bottom.

Turn screw with double offset hexagon socket key (on-board

tool kit).

Convertible top hydraulics:

Open rear lid.

On left side, pull ring (1) to center and turn through 90

°

.

Place ring on holder (2).

Opening convertible top:

If necessary, open convertible top by hand.

When opening the convertible top by hand, only grip in the
middle of the front edge of the front bow.

RA  Opening/closing convertible top in event of a technical fault

BMW AG - TIS

12.02.2013  11:35

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

25 RA Opening_closing Convertible Top In Event Of A Technical Fault|Page 1824 > < 24 RA Removing And Installing_replacing Hard Top Mounting