Z Series E85 Z4 3.0i (M54) ROADST
16 11 048
Removing and installing/replacing fuel filter
with pressure regulator
Special tools required:
16 1 020
Necessary preliminary tasks:
Draw off fuel from fuel tank.
Remove exhaust system.
Remove tunnel thermal insulation.
Disconnect feed line (1) and connector (2) from fuel filter.
To disconnect feed line, press ring (3) in direction of fuel filter and
pull out feed line (1).
Release screw cap with special tool 16 1 020 .
Always replace rubber seal.
Tightening torque 16 14 2AZ.
RA Removing and installing/replacing fuel filter with pressure regulator
BMW AG - TIS
Issue status (12/2007) Valid only until next DVD is issued
Page - 1 -