Z Series E86 Z4 3.0Si (N52) COUPE
Disconnect plug connection (1).
Note:
Pay attention to cable guide (2) for rain sensor.
E60 Security version:
Rain sensor is not installed, cable connection is tied back in
roofliner.
Important!
Risk of damage!
Do not pull off rearview mirror (1) from windscreen against
direction of travel and or snap out by turning.
When snapping out, do not damage control unit (3) for rain
sensor.
E60 Security version:
Rain sensor is not installed.
Snap out interior mirror (1) from mirror mount (2) towards front
with increasing pressure (not abruptly) and remove.
Installation:
1.
Twist mirror foot by approx. 45
°
and fit to mirror mount.
2.
Turn mirror foot until it engages on mirror base.
Only in case of replacement with version with remote control for
central locking:
If necessary, initialize all transmitters (ignition keys), refer
to Owner's Handbook.
RA Removing and installing/replacing interior rearview mirror (with rain sensor)
BMW AG - TIS
08.02.2013 13:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
