Z Series E86 Z4 3.0Si (N52) COUPE
51 21 140
Removing and installing/replacing complete
lock cylinder in left or right front door
Necessary preliminary tasks:
•
Remove outside handle on front door
Note:
Screw (2) must be outside lock cylinder (1).
Release screw (1) until lock cylinder is free.
Removal:
-
Insert ignition key (1) approx. 2/3 into lock cylinder (2).
-
Turn lock cylinder (2) with vehicle key (1) through 90
°
.
-
Pull lock cylinder (2) with ignition key (1) out of lock
actuator (3)
Installation in reverse sequence.
RA Removing and installing/replacing complete lock cylinder in left or right front
BMW AG - TIS
08.02.2013 14:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -