Z Series E86 Z4 3.0Si (N52) COUPE
51 24 004
Adjusting rear lid lock (lower section of rear
lid lock)
Prerequisite:
Rear lid must be correctly adjusted to fit; if necessary, adjust rear
lid.
For ideal adjustment, refer to Body gap dimensions.
If necessary, lock ejectors in detent buffers.
Press ejector into detent buffer and, in this position, twist slightly to
left with a Phillips screwdriver.
Fully turn detent buffer on left/right of rear lid to insert.
Check sliders on striker for damage, replace if necessary.
RA Adjusting rear lid lock (lower section of rear lid lock)
BMW AG - TIS
08.02.2013 14:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
