Z Series E86 Z4 3.0Si (N52) COUPE
Loosen screws on striker until it is just able to move and centres
itself.
Striker must not brush against rear lid lock.
Adjust striker:
Close rear lid.
This automatically adjusts the striker correctly.
Open rear lid.
Tighten down screws on striker.
Check adjustment of trunk lid and trunk lid lock, repeating
adjustment if necessary.
Unscrew detent buffers to the point where left and right sides of
closed rear lid lie rest on detent buffers.
Note:
The rear lid must not be higher than the side panels, otherwise
there is preload on height adjustment!
RA Adjusting rear lid lock (lower section of rear lid lock)
BMW AG - TIS
08.02.2013 14:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -