Century V6-3.1L VIN J (2005)
3. Install the cooling fan blades.
4. Install the cooling fan blade nuts.
Tighten the nuts to 6 Nm (53 inch lbs.).
5. Install the cooling fan shroud.
6. Install the cooling fan shroud clip to the top of the radiator. Apply pressure in order to completely engage the clip onto the radiator.
7. Notice: Refer to Fastener Notice in Service Precautions.
Install the cooling fan shroud bolts.
Tighten the bolts to 6 Nm (53 inch lbs.).
8. Raise and support the vehicle. Refer to Vehicle Lifting.
9. Install the push pin retainer to the lower left side of the fan shroud.
10. Install the transmission oil cooler lines on to the retainer at the bottom of the cooling fan shroud.
11. Lower the vehicle.