Century V6-3.1L VIN J (2005)
12. Install the radiator upper support brackets and bolts that hold the fan shroud.
Tighten the bolts to 10 Nm (89 inch lbs.).
13. Connect the cooling fan electrical connector.
14. Install the radiator inlet hose to the radiator.
15. Install the air cleaner and duct assembly.
16. Install the PCM harness on to the fan shroud clip.
17. Install the right and left engine mount struts.
18. Install the right and left engine mount strut brackets.
19. Fill the cooling system.
20. Connect the negative battery cable.