Century V6-3.1L VIN J (2005)
20. Install the right and left side air distribution ducts.
21. Install the screws to the right and left side air distribution duct.
Tighten the screws to 1.5 N.m (13 lb in).
22. Install the steering column support bracket to the cross vehicle beam.
23. Install the steering column support bracket nuts and bolts.
Tighten the nuts and bolts to 50 N.m (37 lb ft).
24. Install the brake pedal.
25. Connect all disconnected ground wires.
26. Install the passenger side SIR inflator module.
27. Install the instrument panel trim pad.
28. Connect the inlet and outlet heater hose to the heater core.
IMPORTANT: Reposition the heater core hose clamps in the indicated location.
29. Use J 38185 in order to reposition the heater hose inlet and outlet clamp to the heater core.
30. Connect the evaporator tube to the evaporator.
31. Connect the accumulator tube to the evaporator.
32. Install the accumulator tube to evaporator core block fitting bolt.