LaCrosse V6-3.6L VIN 7 (2006)
1. Install the ball stud to the lower control arm.
2. Install the NEW ball stud bolts facing down, away from the ball stud.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the NEW ball stud nuts.
^
Tighten the NEW ball stud nuts to 68 Nm (50 ft. lbs.).
4. Install the ball stud to the steering knuckle.
5. Install the ball stud castle nut.
^
Tighten the nut to 20 Nm (15 ft. lbs.) plus an additional 120°
6. Install a new cotter pin and bend the ends.
7. Install the tire and wheels.
8. Lower the vehicle.
9. Check the wheel alignment.
