LaCrosse V6-3.8L (2009)
![background image](/buick/lacrosse/v6-3.8l/Page-518001.png)
Fuse Block: Service and Repair
Underhood Electrical Center or Junction Block Replacement
Underhood Electrical Center or Junction Block Replacement
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (L26) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair)Battery Negative Cable Disconnection and Connection (LS4) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair).
2. Lift the cover of the underhood junction block (2) to access the positive cable nut.
3. Remove the positive battery cable nut and position the cable (1) away from the junction block.
4. Release the tabs and pull the junction block from the housing.