Lucerne V6-3.8L (2007)
Fluid Line/Hose: Service and Repair
Cooler Fitting to Cooler Replacement (Upper Radiator)
Cooler Fitting to Cooler Replacement (Upper Radiator)
Removal Procedure
Important: The transmission oil cooler (TOC) is held into position inside the radiator by the TOC fittings.
Service one TOC fitting at a time. Removal of both TOC fittings will cause the cooler tank to fall out of position and require radiator
removal to install the TOC fittings.
1. Disengage the plastic cap from the TOC fitting.
Pull the plastic cap back along the pipe.
2. Disconnect the TOC line from the TOC fitting.
3. Remove the TOC fitting from the radiator.
Installation Procedure