Workshop Manuals Factory service & repair Buick
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Buick Lucerne V8-4.6L (2008)03 · Maintenance
03 · Maintenance

Vehicle Lifting: Service and Repair (page 2 of 3)

Make
Buick
Model
Lucerne
Engine
V8-4.6L
Year
2008
Section
Vehicle Lifting
MaintenanceService and Repair · page 2 of 3
background image

Front Lift

Notice: Ensure that the front suspension-contact lift points contact the lower control arms ONLY where identified. Failure to follow this precautionary
step could result in damage to the lower control arm stabilizer link bracket.

When lifting the vehicle with a suspension-contact lift, place the front post lift points at the lower control arms (1).

Rear Lift

Position the suspension contact rear lift under the rear tire and wheel assemblies.

Jacking

When lifting a vehicle with a vehicle jack or a floor jack, block the wheels at the opposite end from which you are lifting. Use jack stands to provide
additional support.

Under the Front Suspension Crossmember

Position the floor jack pad under the front frame rail reinforcements.

Under the Rear Suspension Crossmember

Important: The floor jack pad must not contact the rocker panel or floor pan.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 2008 Buick Lucerne 4.6L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.