buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

(Actuator) Driver Air Mix Valve|Page 9876 > < (Actuator) Driver Air Mix Valve|Page 9874
Page 1
background image

Air Door Actuator / Motor: Service and Repair
(Actuator) Passenger Air Mix Valve

Programmer Assembly

REMOVE OR DISCONNECT    

-

Disable Supplemental Inflatable Restraint (SIR) system, Refer to Air Bags and Seat Belts / Air Bags (Supplemental Restraint Systems). See:
Restraint Systems/Air Bag Systems 

1. Instrument Panel (I/P) compartment insert by pulling rearward and disengaging stops.

2. Temperature valve link rod from plastic retainer on temperature valve.

3. Electrical connector.

4. Passenger air mix valve actuator screws and actuator.

INSTALL OR CONNECT

1. Screws after positioning passenger air mix valve actuator.

-

Tighten screws to 1.4 Nm (12 lb. in.).

2. Electrical connector.

3. Temperature valve link rod.

(Actuator) Driver Air Mix Valve|Page 9876 > < (Actuator) Driver Air Mix Valve|Page 9874