Rainier 2WD V8-5.3L VIN P (2004)
Evaporative Emissions Hose: Service and Repair
EVAP Hoses/Pipes Replacement - Canister/Fuel Tank
EVAPORATIVE EMISSION (EVAP) HOSES/PIPES REPLACEMENT - CANISTER/FUEL TANK
REMOVAL PROCEDURE
IMPORTANT: Clean all the fuel and evaporative emission (EVAP) pipe connections and surrounding areas before disconnecting the pipes in order
to avoid possible fuel/EVAP system contamination.
1. Remove the fuel tank.
2. Disconnect and remove the EVAP pipe from the canister (3).
3. Disconnect and remove the EVAP pipe from the roll over valve (4).
4. Cap the fuel tank roll over valve and canister in order to prevent possible EVAP system contamination.
INSTALLATION PROCEDURE
1. Remove the caps from the fuel tank roll over valve and canister.
2. Install and connect the EVAP pipe to the roll over valve (4).
3. Install and connect the EVAP pipe to the canister (3).
4. Install the fuel tank.