Regal V6-3.8L VIN K (1997)
Wheel Speed Sensor: Service and Repair
Rear Wheel Speed Sensor Jumper Harness
Rear Wheel Speed Sensor Jumper Harness(Left Hand Shown, Right Hand Similar)
NOTE: Raise and support vehicle on suitable hoist, as indicated.
REMOVE OR DISCONNECT
1. Connector at pass thru.
2. Connector at wheel speed sensor.
3. Rear jumper harness from retaining clips.
INSTALL OR CONNECT
1. Rear jumper harness at rear sensor.
2. Jumper harness into retaining clips.
3. Connector to pass thru.