Regal V6-3.8L VIN K (1997)
Wheel Speed Sensor: Service and Repair
Electrical Connectors
ABS VI Electrical Connectors (Typical)
Some Antilock Brake System/Enhanced Traction System (ABS/ETS) components are equipped with electrical connectors using a Connector Position
Assurance (CPA) lock. This feature ensures that when the connectors are installed, they are aligned properly and connected securely.
Important:
^
Remove the lock before separating the electrical connectors.
^
Take care not to damage the locking pin during removal.
^
Make sure that the rubber connector seal is in place on the connector before and after connection.
^
Always install the lock after the connection is made.
