Rendezvous FWD V6-3.5L VIN L (2006)
Trim Panel: Service and Repair
Trim Panel Replacement - Upper Center Pillar
TRIM PANEL REPLACEMENT - UPPER CENTER PILLAR
REMOVAL PROCEDURE
1. Remove the upper seat belt guide loop attachment from the adjuster bracket.
2. Remove the lower center pillar trim panel.
3. Remove the upper center pillar trim panel from the center pillar, by pulling the upper center pillar trim panel to release the push-in retainers.
INSTALLATION PROCEDURE
1. Align the upper center pillar trim panel to the center pillar.
2. Install the upper center pillar trim panel by applying pressure at all the retainers locations until fully seated.
3. Install the lower center pillar trim panel.
4. Install the upper seat belt upper guide loop attachment to the adjuster bracket.