Rendezvous FWD V6-3.5L VIN L (2006)
Spark Plug: Service and Repair
SPARK PLUG REPLACEMENT
TOOLS REQUIRED
J 41131 Engine Tilt Strap
REMOVAL PROCEDURE
NOTE:
-
Observe the following service precautions:
-
Allow the engine to cool before removing the spark plugs. Attempting to remove spark plugs from a hot engine can cause the spark plugs to seize.
This can damage the cylinder head threads.
-
Clean the spark plug recess area before removing the spark plug. Failure to do so can result in engine damage due to dirt or foreign material
entering the cylinder head, or in contamination of the cylinder head threads. Contaminated threads may prevent proper seating of the new spark
plug.
-
Use only the spark plugs specified for use in the vehicle. Do not install spark plugs that are either hotter or colder than those specified for the
vehicle. Installing spark plugs of another type can severely damage the engine.
1. Remove the intake manifold cover.
2. Remove the spark plug wire(s) (2, 4, and 6) from the left side spark plug(s).