Riviera V6-3.8L SC VIN 1 (1995)
1.
Apply 6 mm to 9 mm (1/4 to 11/32 inch) beads of adhesive 15 mm (5/8 inch) wide (Figure 1) where it was previously removed from cardboard
insulator. When a new cardboard roof insulator is used, place adhesive as shown in Figure 2; the adhesive location is marked on the cardboard
insulator. The Concours/DeVille has six beads of adhesive; the Eldorado, Seville, Aurora, Riviera and Park Avenue have five.
Important:
Use Betamate Urethane Adhesive, P/N 12378192, for this installation.
2.
Place cardboard insulator to roof panel.
Important:
Roof insulator must be installed within five minutes of adhesive application.
3.
Headliner.
Important:
Gluing headliner to cardboard roof insulator is not required.
Warranty Information
