Riviera V6-3.8L SC VIN 1 (1995)
5.
Cut off all of the old heat element harness (3) from the seat back trim cover.
Important:
Ensure the heat element is laying flat with no wrinkles on the seat back cushion pad.
6.
Install the seat back cover. Refer to Seat Back Cover and Pad Replacement - Front in the Seats sub-section of the Service Manual.
7.
Ensure the seat heat function is operational.
Seat Cushion Heat Element Replacement - Front
For 1995-1999 Aurora and Riviera
1.
Remove the seat cushion cover. Refer to Seat Cushion Cover Replacement - Front in the Seats sub-section of the Service Manual.
2. Install the seat heat element (Aurora shown).
^
Remove the paper from the tape that is located on the back of the heat element.
^
Carefully position and press the heat element (4) onto the seat cushion pad (5).
^
Tuck the narrow connecting strips into the seat cushion pad trenches.
3.
Insert the seat heat element harness (6) through a hole located in the right rear corner of the seat cushion pad (5).