Riviera V6-3.8L SC VIN 1 (1995)
4.
Connect the seat heat element BLACK electrical connector to the Heat Module BLACK electrical connector.
5.
Cut off all of the old heat element harness (7) from the seat cushion trim cover.
Important:
Ensure the heat element is laying flat with no wrinkles on the seat cushion pad.
6.
Install the seat cushion cover. Refer to Seat
Cushion Cover Replacement - Front in the Seats sub-section of the Service Manual.
7.
Ensure the seat heat function is operational.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the tables.